Arizona Beverage Company successfully used 80 gallons of FasTrac CE820 Gray Epoxy Chocking compound to install eight packaging robots at their NYC distribution warehouse.
Learn more about CE820 Gray Epoxy Grout here.
Thanks to FasTrac CE820 Gray’s convenient packaging, easy-to-mix formulation, and extremely fluid material properties, they were able to self-perform this installation all in-house, without the extra cost and time needed to hire outside labor or use a 3rd party contractor.
Using the FasTrac CE820 Gray in this application resulted in a significant time and cost reduction back to the customer.
THE DECISION TO USE FASTRAC CE820 GRAY EPOXY CHOCK WAS BASED ON MANY DIFFERENT FACTORS:
Quick Delivery FasTrac CE820 Gray is kept In Stock at Energy Tech Systems allowing us to deliver it quickly to the customer, resulting in a lead time reduction of 7 Days compared to the previously specified epoxy chocking product. This helped to greatly accelerate the customer's construction timeline by enabling them to get their robotics equipment set up and operational much sooner.
Tremendous Value FasTrac CE820 Gray offers a tremendous amount of value to the facility owner. FasTrac CE820 Gray epoxy chock is very competitively priced, at less than $100 per Gallon when compared to other two-component chocking compounds available on the market.
Product Qualities FasTrac CE820 Gray offered the following desirable qualities:
High ultimate compressive strengths
Excellent bond to steel and concrete
Excellent effective bearing area
Highly pourable
Convenient mixing
Easy soap and water clean-up
Expert Technical Support
Energy Tech Systems has been a master stocking distributor of many epoxy machinery grouts used for critical equipment settings, since the company’s inception in 1992. For over 30 Years we have supported our growing customer base with the highest level of technical product knowledge in the industry and continue to serve end-user clients by offering on-site technical assistance on their job site to help support the use and installation of all the niche industrial epoxy grout products that we sell.
THE SUCCESSFUL GROUT INSTALLATION IS DIRECTLY ATTRIBUTED TO:
A professional grouting contractor who is well prepared with a plan and the proper equipment to complete the job, and understands the conditions, requirements, and selecting the right material needed to pump the grout under the equipment.
Having a sizable grout crew with adequate labor onsite provided a consistent flow of material and streamlined the gout installation process, resulting in time savings, increased efficiency, reduced waste, and lower cleanup times. By decreasing the turnaround time between grouting operations, the contractor was able to complete the grout installation efficiently within the allotted amount of time.
AS A RESULT OF SELECTING CE820 GRAY EPOXY CHOCK FOR THIS INSTALLATION, THE CUSTOMER ENJOYED SEVERAL ENHANCED OPERATIONAL AND PERFORMANCE BENEFITS.
CE 820 Gray provides excellent tensile and compressive strength properties, ensuring long-term critical alignment of equipment.
CE820 Gray is easy to use, mix, and place into chock and similar type installations.
The ease of use allowed the customer to perform the install entirely in-house, saving a considerable amount of time and money.
ABOUT FASTRAC CE820 GRAY EPOXY CHOCK
FasTrac CE820 Gray is a revolutionary 100% Solids, Two Component Epoxy Chocking compound designed for chocking critical process equipment and setting anchor bolts in concrete. It has been engineered to withstand the harsh
conditions found in heavy industrial plant environments. It is an excellent material for withstanding physical and thermal shock and possesses very high impact and compressive strengths. CE820 Gray is easy to mix and pour due to its
extremely fluid epoxy chocking characteristics.
FasTrac CE820 Gray was designed as a chocking compound for use under critical plant machinery and process equipment including pumps, generators, gears, compressors, engines, turbines, and crane rails. It is also used in high-load
scenarios, for steel-to-steel chocking applications and across a wide variety of industries for setting anchor bolts into concrete, most commonly found when setting CNC machinery and water jet cutting equipment. a revolutionary,
three-component,100% solids high-performance epoxy machinery grout. It is characterized by low dust, high bearing area, low exotherm, and fast cure. www.fastracproducts.com
CE820 Features
High ultimate compressive strengths
Excellent bond strengths to steel, concrete
Excellent effective bearing area
Highly pourable
Soap and water clean-up
Where to Use
Compressors
Pumps
Steel to Steel Chocking
Applications subject to high loads
Anchor/dowel grouting
Comments